Specifications:
Compatibility: Mindray T5/T8 machine
Category: EtCO2
Certifications: FDA, CE, ISO EN , ISO13485, TUV, RoHS Compliant.
Latex-free: Yes
Sterile: No
Warranty: 3 months
Weight: 0.8lb
Packaging Type: Bag
Packaging Included: 1 x ETCO2 Sensor for Mindray.
Product Features:
Principle of Operation Non-dispersive infrared(NDIR), dual wavelength, no moving parts
Initialization Time Capnogram displayed in less than 5 seconds,full specifications within 2 minutes
CO2 Measurement Range 0 – 114 mmHg, 0 – 15 %, 0 – 15.2 kPa(760mmHg)
Rise Time Less than 60 ms - Adult Reusable or Single-Patient-Use Airway Adapter
Less than 60 ms - Infant Reusable or Single-Patient-Use Airway Adapter
CO2 Resolution 0.1mmHg 0 to 59 mmHg
0.25 mmHg 60 to 114mmHg
CO2 Accuracy 0 – 40mmHg ±2 mmHg
41 – 76 mmHg ±5% of reading
77 – 114 mmHg ±8% of reading
Above 80 BPM ±12% of reading
CO2 Stability Short term drift: Drift over four hours shall not exceed 1 mmHg maximum
Long term drift: Accuracy specification will be maintained over a 120-hour period
Sampling Frequency 100 Hz
Respiration Rate Range 2 to 150 Breaths Per Minute (BPM)
Respiration Rate Accuracy ±1 breath
Compensations (Supplied)
Barometric pressure: 400 mmHg to 800 mmHg
Operator selectable O2, N2O, He and agent compensation Calibration No routine user calibration required. An airway adapter zero is required when changing
Airway Adapters Single-patient-use or reusable, < 5 cc dead space (adult), < 1 cc dead space infant
Voltage Requirements 5.0 VDC ±5%
Power Consumption 1.2Watts typical (Steady State)
Up to 1.8 Watts maximum on power up (Warm up)
Interconnection
(The RS232 connector version is also provided)
Standard - Redel 8-pin plastic connector
Pin out:
1. VA 5.0VDC
2. Shield Shield
3. DGND Digital return
4. VSRC 5.0VDC
5. TxD Serial data from Sensor
6. RxD Serial data from Host
7. AGND Analog return
8. SYNC Unused
Data Interface RS232 , bi-directional, 19200 baud rate, standard N-8-1.
Data Output CO2 gas concentration(mmHg), End-tidal CO2, Inspired CO2, Respiratory Rate. Gas and barometric pressure compensated when supplied by host.
Temperature and Humidity Operating: 0 to 45℃, 10 to 90% RH, non-condensing
Storage: -40 to 70℃, <90% RH, non-condensing Water Resistance IPX4 – Splash-proof (sensor head only)
Compatibility: Mindray T5/T8 machine
Category: EtCO2
Certifications: FDA, CE, ISO EN , ISO13485, TUV, RoHS Compliant.
Latex-free: Yes
Sterile: No
Warranty: 3 months
Weight: 0.8lb
Packaging Type: Bag
Packaging Included: 1 x ETCO2 Sensor for Mindray.
Product Features:
Principle of Operation Non-dispersive infrared(NDIR), dual wavelength, no moving parts
Initialization Time Capnogram displayed in less than 5 seconds,full specifications within 2 minutes
CO2 Measurement Range 0 – 114 mmHg, 0 – 15 %, 0 – 15.2 kPa(760mmHg)
Rise Time Less than 60 ms - Adult Reusable or Single-Patient-Use Airway Adapter
Less than 60 ms - Infant Reusable or Single-Patient-Use Airway Adapter
CO2 Resolution 0.1mmHg 0 to 59 mmHg
0.25 mmHg 60 to 114mmHg
CO2 Accuracy 0 – 40mmHg ±2 mmHg
41 – 76 mmHg ±5% of reading
77 – 114 mmHg ±8% of reading
Above 80 BPM ±12% of reading
CO2 Stability Short term drift: Drift over four hours shall not exceed 1 mmHg maximum
Long term drift: Accuracy specification will be maintained over a 120-hour period
Sampling Frequency 100 Hz
Respiration Rate Range 2 to 150 Breaths Per Minute (BPM)
Respiration Rate Accuracy ±1 breath
Compensations (Supplied)
Barometric pressure: 400 mmHg to 800 mmHg
Operator selectable O2, N2O, He and agent compensation Calibration No routine user calibration required. An airway adapter zero is required when changing
Airway Adapters Single-patient-use or reusable, < 5 cc dead space (adult), < 1 cc dead space infant
Voltage Requirements 5.0 VDC ±5%
Power Consumption 1.2Watts typical (Steady State)
Up to 1.8 Watts maximum on power up (Warm up)
Interconnection
(The RS232 connector version is also provided)
Standard - Redel 8-pin plastic connector
Pin out:
1. VA 5.0VDC
2. Shield Shield
3. DGND Digital return
4. VSRC 5.0VDC
5. TxD Serial data from Sensor
6. RxD Serial data from Host
7. AGND Analog return
8. SYNC Unused
Data Interface RS232 , bi-directional, 19200 baud rate, standard N-8-1.
Data Output CO2 gas concentration(mmHg), End-tidal CO2, Inspired CO2, Respiratory Rate. Gas and barometric pressure compensated when supplied by host.
Temperature and Humidity Operating: 0 to 45℃, 10 to 90% RH, non-condensing
Storage: -40 to 70℃, <90% RH, non-condensing Water Resistance IPX4 – Splash-proof (sensor head only)
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
