Tapper up to 3/8 in (M10)
Fast, precise tapper with reversing gear for shorter working times.
- Exceptional speed due to reversing gear for automatic rotation reversal when withdrawing the drill spindle from the threaded hole. Fast, 680 rpm return for shorter cycle times.
- Outstanding precision due to a tight connection of drill shaft and tapping chuck using a B12 tapered mount for high accuracy. Accurate tapper mounting in the tapping chuck for best work results.
- FEIN ergonomic grip applies the feed pressure directly along the tapping axis with the guiding hand ideally positioned.
- FEIN stable speed high-performance motor.
- Width across corners only 29/32 in (23 mm).
- Metal gear head.
- Torsion-free, barrel-type motor housing.
INCLUDES
- 1 additional handle
- delivery scope without tapping chuck.
Technical Data
| Power consumption | 450 W |
|---|---|
| Power output | 250 W |
| No-load speed in reverse | 0 - 1,000 rpm |
| Load speed when cutting | 0 - 450 rpm |
| Load speed in reverse | 0 - 680 rpm |
| Torque at maximum output power | 186 [21] in/lbs[Nm] |
| Stall/ blocking torque | 469 [53] in/lbs[Nm] |
| Thread in steel up to | M 10 |
| Thread in stainless steel | M 10 |
| Cone at drill shaft | B 12 |
| Clamping neck | 1-3/4 [43] in[mm] |
| Minimum clearance | 7/8 [23] in[mm] |
| Minimum clearance | 23 mm |
| Cable with plug | 16.4 [5] ft[m] |
| Weight | 3.53 [1.60] lbs[kg] |
| Weight | 3.53 lbs |
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
