The Rotaid Solid Plus cabinet is suitable for installations that require ingress and impact protection, such as industrial/manufacturing plants, sports centers, transportation facilities and other heavy use venues. Also suitable for use in outdoor environments in no frost zones, with temperatures of 40°F / 4°C and above.
The Solid Plus cabinet can house all LIFEPAK and HeartSine AEDs, as well as additional AED brands.
- Application: For indoor or outdoor use, temperatures of 40°F / 4°C and above.
- Cabinets should not be installed in areas of direct sunlight.
- Dimensions: Length: 18.9 inches (48 cm) Width: 18.9 inches (48 cm) Depth: 7.1 inches (18 cm) Weight: 14.77 lbs (6.7 kg)
- Backplate: 100% recycled HDPE (high-density polyethylene), three individual plates, fringe pattern finish.
- Rubber gasket ensures protection from dust and water.
- Pre-drilled mounting holes on top of back plate for optimal placement of the defibrillator. Mounting hardware included.
- Solid steel hook on the bottom to install tamper seal, instructions or label.
- Four recessed mounting positions for secure attachment. Mounting hardware included.
- Cover: 100% recycled transparent Polycarbonate with UV blocking, 5 mm thick. Four directional arrows provide guidance for opening. Six indents provide grip for quick and solid opening.
- Available colors: red and white
- Alarm System: 90dB audible system, triggered by coin sized low power magnet in the cover, has an ABS housing, is pre-installed and attached to the back plate. The alarm unit is powered by two AAA batteries.
- Environmental: Ingress protection IP55 (IEC60529/EN60529 IP55) - Dust and water jet protected, Impact protection IK10(20J)
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
