The SleepSense Alice 5 AC Pressure Plus Sensor (#14833) was specifically designed for use with Alice 5 systems and monitors both snore and flow. The lightweight, easy-to-use design features two sensitivity setting switches on the side panels of the device. When adjusted, these switches will increase or decrease the sensitivity of the snore or pressure channels if the signals are too strong or too weak for proper recording.

Warranty: 1 Year - Free of Defects in Materials and Quality Workmanship.

SleepSense Pressure Sensors are designed to detect respiratory airflow and snoring for recording onto a polygraph, EEG, or similar type of physiological recorder. The internal piezo crystal senses minute pressure changes and filters them into two bands; one for slow waves to the flow channel and one for fast waves into the snore channel. The sensor plugs directly into the electrode jack box (no external power source is required), and a nasal or oral/nasal cannula is attached to the patient.

Note: SleepSense items are for professional use only, and are for sale by or on the order of a physician only.

Specifications

SleepSense Alice 5 AC Pressure Plus Sensor Specifications

• Recommended Filter Settings:
  • Flow:
    • High Pass: 0.01 Hz.
    • Low Pass: 70 Hz.
  • Snore:
    • High Pass: 30 Hz or as recommended in the system's instructions.
• Signal Output: Approximately 0.5 mV for normal respiration or loud snoring.
• Operating Conditions: 40 to 104 °F.
• Storage Temperature: -4 to 140 °F.
• Operating and Storage Humidity: 5 to 95% (non-condensing).

Literature

SleepSense Alice 5 AC Pressure Plus Sensor Literature