Specifications:

Name: handheld pulse oximeter.
Model:SPH100

Structure:
It consists of the main unit and SpO2 probe.

Features:
✧It is lightweight, small in size and ceasy to carry.
✧High resolution LCD to display plethysmogram and measured data.
✧Monitor SpO2 and PR parameters simultaneously;
✧PI (Perfusion Index) display is available;
✧Real-time store and recall SpO2 and Pulse Rate value.
✧Audible & Visual alarm function;
✧Power management function;

Working Environment:
Operating temperature:5~40 °C.
Operating humidity: 30~ -80%.
Atmospheric pressure:70kPa~ 106kPa.

Instructions of Operation:
1. The finger should be put in properly and correctly.
2. Do not shake the finger and keep at ease during measurement.
3. Do not put wet finger directly into sensor.
4. Avoid placing the sensor on the same limb which is wrapped with a cuff for blood pressure measurement or during venous infusion.
5. Do not let anything block the emitting light from the sensor.
6. Vigorous exercise and electrosurgical device interference may affect the measuring accuracy.
7. Using enamel or other makeup on the nail may affect the measuring accuracy.
8. If the first reading appears with poor waveform (irregular or not smooth), then the reading is unlikely true, the more stable value is expected by waiting for a while, or a restart is needed when necessary.


Note:
1.In order to achieve freight safety,  this product does not contain batteries.
2.If the leadwire falls off during the measurement process,screen will appear “No Signal". Oximeter gives off the sound alarm like “beep” (intervals of 5 seconds) and continues s for about 1 minute. if the leadwire is still off at this time, oximeter will automatically shut down.