metene TD-4116 Blood Glucose Test Strips
These strips are compatible with metene TD-4116 blood glucose monitor only. The meter and strips are equipped with industry-leading biosensor and technologies, help you to track and manage your blood sugar level better with just a few steps.
- Quantity: 100 count.
- Expiration: 6 months after first opening.
- Measurement range: 20~600 mg/dL (1.1~33.3 mmol/L)
No Coding, Easy to Use
Just insert the contact bar of the strip into the meter correctly when the meter is off, no coding, easy to use for the senior.
Small 0.7µL Blood Sample
Only 0.7µl blood sample required, minimally wound and reduce pain. Adopt automatic siphon to quickly absorb blood sample, keep the blood away from wasted.
Fast 7 Second reading
Get a measurement in just 7 second after applying the blood sample. Fast.
How to Insert The Strip And Apply Blood Sample Correctly
1. Hold the test strip handle
2. Insert the end of the contact bar into the meter. Push it firmly until the strip will go no further
3. Make sure the front side (blue) of the strip face up when insert
4. Touch the blood with the absorbent hole to absorb it. Do not drip blood directly on the strips.
Warm Tips to Get an Accurate Testing Result:
- Store these strips in a cool and dry place between 39.2℉ and 104℉ (4℃ and 40℃) and 10% to 85% relative humidity. Keep away from direct sunlight.
- Store the test strips in their original vial ONLY. Do not transfer them to a new vial or any other containers.
- Make sure the surface of strip is free from moisture or other contamination and avoid touching the absorbent hole and the contact bar of the strip.
- Close the vial after taking out the strip. It is best to use the strip within 3 minutes after taking it out.
- Close the vial after taking out the strip. It is best to use the strip within 3 minutes after taking it out.
- Do not test blood glucose during or soon after the xylose absorption test. Xylose in the blood can give falsely elevated results.
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.