Included In this Sale:
- New Philips Respironics Trilogy Evo Portable Life Support Ventilator DS2110X11B
- New Detachable Battery Ref PN 1127889
- Carry Case REF 1133930
- Oxygen Input Inserts REF 1040390
- Owners Manual REF 1137270
- Respironics #1073902 Flexible Trach Adapter
- RESPIRONICS 1132340 Patient Circuit, Disposable 22mm, non heated passive
- 2 year MFG Warranty
- FREE Ground Shipping to the Lower 48 US States
Specifications:
-
Ventilation modes
A/C-VC -
Assist control (volume control)
CPAP -
Continuous positive airway pressure
PSV -
Pressure support ventilation
S/T -
Spontaneous/timed ventilation
SIMV-PC -
Synchronized intermittent mandatory ventilation (pressure control)
SIMV-VC -
Synchronized intermittent mandatory ventilation (volume control)
MPV-PC -
Mouthpiece ventilation (pressure control)
MPV-VC -
Mouthpiece ventilation (volume control)
-
-
Physical
Weight -
5.2 kg
Size -
16.5 cm D x 28.6 cm W x 24.5 cm H 6.48” D x 11.25” W x 9.65” H
Screen dimensions -
8”, 20.32 cm
-
-
Oxygen
Low flow -
0 to 30 l/min; maximum 10 psi
High pressure -
280 to 600 kPa (41 to 87 psi)
-
-
Measured and displayed patient parameters
Tidal volume (Vti or Vte) -
0 to 2000 ml
Minute ventilation (MinVent) -
0 to 30 l/min
Leak -
0 to 200 l/min
Respiratory rate (RR) -
0 to 90 BPM
Peak inspiratory flow (PIF) -
0 to 200 l/min
Peak inspiratory pressure (PIP) -
0 to 90 cmH2O
Mean airway pressure -
0 to 90 cmH2O
Percentage spontaneous triggered breaths (%Spont Trig) -
0 to 100%
I:E ratio -
9.9:1 to 1:9.9
Dynamic compliance (Dyn C) -
1 to 100 ml/cmH2O
Dynamic resistance (Dyn R) -
5 to 200 cmH2O/l/sec
Dynamic plateau pressure (Dyn Pplat) -
0 to 90 cmH2O
Auto-PEEP -
0 to 20 cmH2O
FiO2 with FiO2 sensor -
21% to 100%
SpO2 with pulse oximeter accessory -
0 to 100%
Pulse rate with pulse oximeter accessory -
18 to 321 beats per minute
EtCO2 with CO2 accessory -
0 to 150 mmHg
-
-
Electrical AC input voltage -
100V - 240V, 50/60 Hz, 1.7 - 0.6A
DC input voltage -
12/24V 6.5A
Internal and detachable Li-on batteries -
15 hours’ nominal total run time per method in IEC 80601-2-72 (7.5 hours each battery)
Charge time for detachable and internal battery -
from 0% to 80%: 2.5 hours; from 0% to 100%: 3.5 hours
-
-
Alarms Inspiratory Pressure -
PEEP+1 to 89 cmH2O
Tidal Volume -
OFF, 10 - 2000 ml
Minute Ventilation -
OFF, 0.2 - 30 L/min
Respiratory Rate -
OFF, 1 - 90 BPM
Circuit Disconnection -
OFF, 5 - 60 sec
Apnea Interval -
5 to 60 sec
No trigger -
OFF; 0.5-15 min (ONLY in MPV)
-
-
Controls AVAPS with passive circuit -
PSV, S/T, and A/C-PC modes only
Tidal volume -
35 - 2000 ml on Dual Limb and Active Flow circuits, 50 - 2000 ml on passive and active PAP circuits
Breath rate -
0 - 80 BPM
PEEP -
0 - 35 cmH20 for active circuits 3 - 25 cmH20 for passive circuits
EPAP/CPAP -
3 to 25 cmH20
IPAP -
3 to 60 cmH20
Pressure support/pressure control -
0 to 60 cmH20
Inspiratory time -
0.3 - 5.0s
Rise time -
0 to 6
Triggering and cycling -
Off, AutoTrak, Sensitive, AutoTrak, and Flow Trigger
Flow trigger sensitivity -
0.5 - 9 l/min
Flow cycle sensitivity -
10% - 90% of peak flow
Flow pattern -
Square, Ramp
FiO2 -
21% - 100%
Inspiratory time min/max -
0.3 to 3.0 sec
Backup ventilation -
ON-OFF
-
- *Nominal run time per method in International Electrotechnical Commission (7.5 hour/battery). Detachable battery charge time 0% to 80% is 2.5 hours, internal battery charge time 0% to 100% is 3.5 hours.
For use in dynamic environments
Long-lasting battery life
Meet your patients’ changing needs
Easy access to data
Intuitive navigation
Reliability from a trusted source
Adapting with every breath
On-demand ventilation
Sensitivity when needed most
Low cost of ownership
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.