The GE Tec 5 Selectatec Vaporizer is designed for out of circuit use in continuous flow techniques of inhalation anesthesia.
Warranty: 3 Years.
The GE Tec 5 Selectatec Vaporizer is temperature, flow, and pressure compensated so that its output remains relatively constant despite cooling due to evaporation, variations in inlet flow, and fluctuating pressures. It is designed for use on Selectec Series Mounted Manifolds.
Features
GE Tec 5 Selectatec Vaporizer Features
- Output remains relatively constant despite cooling due to evaporation.
- High liquid capacity of 300 ml.
- Accurate calibration.
- Ergonomic design.
- Single control dial for ease of use.
Specifications
GE Tec 5 Selectatec Vaporizer Specifications
- Anesthetic Agent:
- Sevo / Sevoflurane.
- Iso / Isoflurane.
- Weight: 15.4 lb (7 kg).
- Dimensions: 9.8" x 6.5" x 4.3" (250 mm x 164 mm x 110 mm).
-
Environmental Conditions:
- Operating Temperature: 16 degrees C to 35 degrees C.
- Storage Temperature: -40 degrees C to +65 degrees C.
-
Accuracy at 5 liters/minute O2 21 degrees C +/- 2 degrees C:
-
Vaporizer 5%:
- +/- 0.25% of delivered agent OR
- +/- 15% of dial setting (whichever is greater).
-
Vaporizer 8%:
- +/- 0.4% of delivered agent OR
- +/- 15% of dial setting (whichever is greater).
-
Vaporizer 5%:
-
Resistance to Gas Flow with Vaporizer Out of Circuit:
- Resistance: 10 to 15 cm wg.
- Vaporizer Setting: ON + 0%.
- Flow Rate: 5 liters per minute, Oxygen.
- Temperature: 21 degrees C +/- 2 degrees C.
Anesthetic Agent
GE Tec 5 Selectatec Vaporizer Anesthetic Agent
- #MFI-GEH-TEC5-ISO: Isoflurane.
- #MFI-GEH-TEC5-SEVO: Sevoflurane.
Literature
GE Tec 5 Selectatec Vaporizer Literature
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.