Function and Features
- Holds 2 plastic or glass syringes from 10 μL to 60 mL
- Multiple working modes available
- Colour LCD touch screen for easy operation
- Keypad with indicators for clear working status
- Screen lock and muted-key operation available
- Built-in selection of syringes from major manufacturers and models
- Syringe protection and blockage alarm
- Built-in RS485 communication, support MODBUS protocol
- External signal to control start/stop and direction
- Wide range of power input
- Full metal housing
Specifications
- Syringe size: 10µl-60ml
- Number of channels: 2
- Flow range: 0.184nL/min to 83.318mL/min
- Operation modes: infuse only, withdraw only, infuse/withdraw, withdraw/infuse, and continuous
- Stroke resolution: 0.156μm/μstep
- Pusher travel rate: 1μm/min to 150mm/min
- Accuracy: ±<0.35% (when stroke > 30% of large stroke)
- Linear force: 16kgf
- Display: 4.3-inch LCD touch screen with operating keypad
- Power-off memory: stores the running parameters automatically
- Output: Â RS-485, USB, and 15-pin D-sub connector
- Power: AC100-240V, 50/60Hz
- Operating temperature: 5-40℃
- Relative humidity: <80%
- Dimensions: 245x195x140mm
- Weight: 3.2kg
Reference Flow Rate
| Syringe size | Syringe ID(mm) | Min flow rate (nL/min) | Max flow rate(mL/min) |
| 10μL | 0.485 | 0.184 | 0.027 |
| 25μL | 0.729 | 0.417 | 0.626 |
| 50μL | 1.03 | 0.833 | 0.125 |
| 100μL | 1.457 | 1.667 | 0.250 |
| 250μL | 2.304 | 4.169 | 0.625 |
| 500μL | 3.256 | 8.326 | 1.248 |
| 1mL | 4.699 | 17.342 | 2.601 |
| 5mL | 11.989 | 112.890 | 16.933 |
| 10mL | 14.427 | 163.169 | 24.754 |
| 20mL | 19.05 | 285.027 | 42.754 |
| 30mL | 21.59 | 366.090 | 54.913 |
| 60mL | 26.594 | 555.459 | 83.318 |
The reference flow rate data is obtained by transferring pure water at room temperature and atmospheric pressure. The actual flow rate is influenced by various factors such as pressure and medium properties.
WASHING INSTRUCTIONS:
Machine wash separately in cold water on a gentle cycle. Tumble dry separately on low heat. Add QE Home Wool Dryer Balls to reduce wrinkles and increases drying efficiency. Touch up with a low heat iron as needed. Do not bleach or dry clean.
